AirLive WN-300R - Manual (Page 74)

Use this NTP
Server If you prefer to use a particular NTP server as the primary
NTP server, check the checkbox "Use this NTP Server" and
enter the Server's IP address in the fields provided.
If this setting is not enabled, the default NTP Servers are
used.
Current Time This displays the current time on the Wireless Router, at the
time the page is loaded.
6.6 Port Trigger
If you use Internet applications which use non-standard connections or port numbers,
you may find that they do not function correctly because they are blocked by the
Wireless Router's firewall. In this case, you can define the application as a "Port
Trigger".
The Port Trigger screen can be reached by clicking the Port Trigger on the screen.
You can then define your Port Trigger. You will need detailed information about the
application; this is normally available from the supplier of the application.
Also, note that the terms "Incoming" and "Outgoing" on this screen refer to traffic from
the client (PC) viewpoint
AirLive WN-300R User’s Manual 68