AirLive WP-201G V2 - Manual (Page 40)

9. Press Enter to select the newly created print server.
10. Select Print Server Configuration
11. Select Printer Configuration
12. Select Printer 0 (or Printer 1, Printer 2), and press Enter, then select P1 (or P2, P3) in the Type field. If
your print server is with only one port, you do not need to configure this Type field.
13. Press Esc, and answer Yes to the Save Changes question.
14. Select Queues Serviced by Printer, then select Printer 0 (or Printer 1, Printer 2) and press Enter.
15. Press Insert and add your newly created print queue to the list of queues serviced by the printer. Enter a
priority number for the queue service, or press Enter to accept the default.
16. Repeatedly press Esc to exit the PCONSOLE program.
17. Reset the print server to have the changes take effect.
Note: If the print server you have is with multiple printer connectors, you may create multiple queues and
printer objects.
Your print server should now be ready to use. You should be able to redirect printing to your print server using
a CAPTURE command such as the one shown in the previous section.
AirLive WP-201G v2 User’s Manual
32