AirLive WP-201G V2 - Manual (Page 44)

AirLive WP-201G v2 User’s Manual
36
3. Add an entry to the host’s /etc/printcap file, similar to the following:
printer-name:\
:lp=:\
:rm=203.66.191.186:\
:rp=p1:\
:If=/var/spool/lpd/pserverd/log:\
:sd=var/spool/lpd/pserverd:\
:mx#0:
Lines should be indented with tabs. More than one printer name can be used, with variants separated by
vertical bars (name1|name2).
The rm=entry should correspond to the IP address you have assigned to the print server. You can also use a
host name if you have assigned one in the /etc/hosts file.
The sd= entry should correspond to the port name of the remote printer. The values should be one of p1, p2
or p3 depending on the printer port.
The print server should now be available for printing from your UNIX host.