AirLive WP-201G V2 - Manual (Page 71)

AirLive WP-201G v2 User’s Manual
63
8.4.2 Wireless
If you want to use the print server through wireless LAN, please set up the print server through Ethernet first
and make sure the wireless LAN setting is correct. After setting the wireless LAN, unplug the Ethernet cable
and restart the print server, then you can start to use the print server through wireless LAN. If the wireless
configuration does not work, please plug the Ethernet cable again, restart the print server and configure the
print server through the Ethernet until the wireless LAN settings are correct.
You can set parameters that are used for the wireless stations to connect to this print server. The parameters
include “Function” and “ESSID”. You can manually set the parameters of wireless LAN in this page or use the
“Site Survey” function to automatically search for an available access point and associate with it.
Mode is the operation mode of wireless station. You need to have an access point as the wireless LAN
infrastructure, the wireless mode is “Infrastructure” mode.
ESSID is the unique name identified by in a wireless LAN. The ID prevents the unintentional merging of two
co-located WLANs. Please make sure that the ESSID of all stations and access points in the same WLAN
network are the same.
Channel Number is the channel number of your wireless LAN. The channel number is fixed to number “11”.