AirLive WP-201G V2 User Manual
Page 57
AirLive WP-201G v2 User’s Manual
49
If you select to let the print server scan for an available access point, the following window will pop up.
The list is the scanned available access points. Select an access point in the list and click Next. If you cannot
find the access point that you want to use, click Scan to let the print server scan again.
“Infrastructure” mode has to go through the following procedure:
The print server supports WEP, WPA-PSK and WPA2-PSK security mode. If you want to use WEP encryption
to protect your wireless network, you have to select “WEP (ASCII)” or “WEP (HEX)”. If you want to use
WPA-PSK, you have to select “WPA-PSK”. If you want to use WPA2-PSK, you have to select “WPA2-PSK”.
The wireless security setting should be the same with other wireless devices in the same network.