Specifications – Autoquip SR4 MANUAL TURNTABLE User Manual
Page 8
8
LOAD CAPACITY
1.
The load capacity rating is labeled on the top of the turntable platform.
Turntables should not be overloaded beyond the established capacity as
damage and/or personal injury may result.
2.
When attaching the turntables to other pieces of equipment such as scissors lifts,
remember that the rated capacity of the turntable must not exceed the rated
capacity of the lift, tilter, etc.
UNBALANCED LOADING
1.
All standard turntable capacities assume that the load on the turntable is
uniformly distributed and that the center of gravity of the load is placed within ten
inches of the center pin.
2.
Standard turntables are not designed to withstand true edge or axle loading. If
edge or axle loading is anticipated, additional turntable platform support at the
edges must be considered and provided.
OPTIONS
1.
Turntables are available with optional detents, locks, physical stops, limit switch
signals, or beveled-toe guards.
2.
The smallest turntable platform size with beveled-toe guards is 44” x 44” to
adequately clear the support rollers mounted to the standard 24” x 24” turntable
base plate.
3.
Beveled-toe guards also add six inches to the lowered height of the standard
manual turntable (ten inches total).
SPECIFICATIONS