BAND-IT UL4000-B Cordless Ultra-Lok Tool - Manual (Page 4)

BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-0307 USA
P: 1-800-525-0758
F: 1-800-624-3925 Document # P07986 Rev. F
© Copyright
BAND-IT-IDEX, Inc. 2011
All rights reserved
www.BAND-IT-IDEX.com
Page 4 of 14
UL4000-B
UL4000-B220
Ultra-Lok

Tool
Setup
Instructions
Note: Some components are not visible in this illustration.
Tension Screw
NOTE: Alignment is critical for proper tool function.
Drill Clutch
Be careful to align the end of the Tension Screw with the slot in the end of
the Drill Clutch, as shown above.
Orient Drill Clutch
Pin horizontally