Spacer kit mounting screw, Standard mounting screw – BLACKHAWK! LEVEL 2 SERPA LIGHT BEARING FOR XIPHOS NT User Manual
Page 15
NOTE: Do not tighten mounting screws with a power tool or otherwise apply excessive force. Doing so can
damage your holster.
• Routinely check mounting screws for loosening and tighten if necessary
WARNING!: Do not use holster if a mounting screw is missing. Using with less than all three screws can
weaken the holster’s retention properties. Contact BLACKHAWK!
®
for replacement mounting screws.
• To compensate for bulky body armor or varied hip-to-waist contours, BLACKHAWK!
®
’s holster spacer kit
allows you to adjust the amount of angle and distance away from your body.
NOTE: Do not use longer spacer kit mounting screws without the spacer. Doing so can damage your holster.
3.3 Mounting Your Jacket Slot Belt Loop to a Duty Belt
Use your SERPA
®
holster only with a durable and well-maintained belt specifically designed for duty use. The
jacket slot belt loop can accommodate duty belts up to 2 ¼” wide. To mount your jacket slot belt loop to a duty
belt, follow these steps:
15
Spacer Kit Mounting Screw
(Shown actual size)
Standard Mounting Screw
(Shown actual size)