BLACKHAWK! LEVEL 2 SERPA LIGHT BEARING FOR XIPHOS NT User Manual
Page 16
1. Remove belt loop mounting screws completely.
2. Spread the two straps of the belt loop open and slide over the duty belt at the desired location.
3. Push all the way down until the top of the duty belt is seated firmly against the inside radius of the loop.
4. Hand-tighten screws evenly and firmly. DO NOT OVERTIGHTEN. If using a torque screwdriver, tighten using
a setting of 12 inch-lbs.
5. Push and pull on the holster to make sure it does not move on the duty belt.
WARNING!: Ensure that nothing on your duty belt, holster or clothing (e.g. drawstrings) interferes with
the safe holstering and drawing of your firearm and functioning of your holster.
3.4 Mounting Your Tactical Holster Platform to a Belt
Use your SERPA
®
holster only with a durable and well-maintained belt specifically designed for tactical or duty
use. To mount your tactical holster platform to a belt, follow these steps:
1. Attach platform to belt using VELCRO
®
belt keepers. Spread the two straps apart along your waist to help
with stability.
16