Online manual not for resale purposes – BLITZ Subaru Impreza WRX Intercooler Kits User Manual

Page 10

Advertising

Check to see that the piping does not

I/C piping

** Please check to see that all clamps are tight and secure and that the I/C piping is free from obstruction.

to make room for the intercooler and piping. Please

** If you cut the bumper cover the factory fog lights

***An aftermarket bumper is highly recommended for
ease of installation.

**After installation please check to see that all clamps and I/C piping is secure.
**Please make sure that there are no air leaks.

Pictures above are of a Japan specification vehicle.

Page 10

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be reproduced, stored

in retrevial systems, or transmitted in any form or means with out prior written permission of Blitz Co., Ltd. (Japan).

Please cut the splash guard to acomadate the

interfere with the factory boost solenoid

Cut the mouth of the bumper and the fog light housing

cut only what is neccasary.

cannot be used again.

Online Manual Not For Resale Purposes

Advertising