Online manual not for resale purposes – BLITZ Subaru Impreza WRX Intercooler Kits User Manual

Page 7

Advertising

This is a close up view on how to cut the lower part of the reinforcement

to the intercooler. Use 2 of the 8 x 12 mm bolts.

If the intercooler is touching the chassis please make adjustments as necessary.

Pictures above are of a Japan specification vehicle.

Page 7

Use bracket A with the short side of the L connecting

Use bracket B to attach the intercooler to the reinforcement. You will attach the bracket using the factory
nuts and the 8 x 12 bolt. Please check to make sure that the intercooler is not touching the chassis.

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be reproduced, stored

in retrevial systems, or transmitted in any form or means with out prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising