Online manual not for resale purposes – BLITZ Subaru Impreza WRX Intercooler Kits User Manual

Page 2

Advertising

DISCLAIMER

* This product does require extensive modification to the factory
bumper cover and to the factory bumper reinforcement.

* "Blitz" and it's are not responsible for any injuries or damages
caused by installation of this product

* "Blitz" and it's dealers are not responsible for any damages caused
to the vehicle by installation of this product.

* Subaru Imprezza WRX LM Intercooler part # 12345 CANNOT be used
with the factory fog lights or air box.

* A "Blitz" filter kit (part number 26113 or 56113) or an aftermarket
filter kit is recommended to complete the intercooler installation

* A "Blitz" blow off valve is recommended to prevent compressor surge.
Custom fabrication is neccassary to install the "Blitz" Blow off valve

* All pictures shown within this installation manual are of a Japan
specifacation vehicle. U.S. bumper reinforcement IS different.

* The installation of this product my lead to increased boost
readings, and may require fuel tuning.

* This product was designed for off road use only and should never
be used on a public road. Please check with your local safety
regulations.

* This product was designed for non-modified vehicles. In the case
where non-factory parts has been installed, or in the case of
vehicle accident, this product may experience ill-fitment
or may not be useable at all.

Page 2

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be reproduced, stored

in retrevial systems, or transmitted in any form or means with out prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising