Online manual not for resale purposes – BLITZ Subaru Impreza WRX Intercooler Kits User Manual

Page 4

Advertising

Above is a rough sketch for the bumper and reinforcement layout

securing the factory grill

the grill. There should be one clip on each side of the grill.

3 - Remove the headlight assemblies.

4 - Remove the push clip located under the headlight

securing the bumper to the fender

Page 4

Bumper and stock intercooler removal

1 - Use a small pick or screwdriver to remove the push clips

2 - Once all the clips are removed you must use a pick to release

5 - Remove the splash guard to remove the push clip

REINFORCEMENT

BUMPER COVER

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be reproduced, stored

in retrevial systems, or transmitted in any form or means with out prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising