Online manual not for resale purposes – BLITZ Subaru Impreza WRX Intercooler Kits User Manual

Page 9

Advertising

pipe 1 has to be rotated

axle

the tie rod or exhaust pipe

the reinforcement

Pictures above are of a Japan specification vehicle.

Page 9

Connect the I/C pipe to the transmission using the

Use the supplied bracket D to attach the I/C pipe

factory bolt.

2 to the motor. The factory clamp next to I/C

* Make sure that the I/C pipe does not touch the

Make sure that the I/C pipe does not touch the

Make sure that the I/C pipe does not touch

reinforcement

The factory air box cannot be used with the

Make sure that the I/C pipe does not touch

intercooler kit. The Blitz filter kit is shown above.

BRACKETT

REVERSE

WARNING: All images and text in this manual is the property of Blitz Co., Ltd. (Japan). No part of this may be reproduced, stored

in retrevial systems, or transmitted in any form or means with out prior written permission of Blitz Co., Ltd. (Japan).

Online Manual Not For Resale Purposes

Advertising