Installation instructions – Blue Sea Systems 7620 ML-ACR Automatic Charging Relay - 12V DC 500A User Manual
Page 4
Advertising
To install a remote LED indicator:
• Connect switch pin 8 to DC positive protected by a 2 Amp in-line fuse.
• Connect pin 7 to the yellow wire from the harness.
4.50"
114.30mm
3.00"
76.20mm
5.47"
138.94mm
3.75"
95.25mm
2.03"
51.56mm
1.90"
48.26mm
1.03"
26.16mm
Installation Instructions
(continued)
page 4 of 4
990180180 Rev.004
Advertising
This manual is related to the following products: