CHAMPION EUCCW Series - Manual (Page 34)

26
7. Next, compare the site utilities with the utility connections
on the dishwasher.
The utility locations and ratings of the must match
the dishwasher when it is re-assembled in its
permanent location.
Contact a supervisor immediately if a utility location
does not match the
dishwasher.
8. Check floor stability. Flooring must support the weight of the
dishwasher without bowing when weight is applied.
Tiled floors may fracture if loads are dropped on or drug across
its surface.
9. Move the palleted sections near their permanent locations.
Remove protective coverings, shipping straps, brackets and
palletized accessories.
10. Inspect the underside of each section, (below the base) and
note the position of piping, valves, and other components that
may be in the way
11. Carefully lift each section off the pallet. Screw the adjustable
bullet-feet in as far as possible, then lower the section to the
finished floor.
Installation Instructions _______

Installation
The Order of Assembly
Order of Assembly