chiliGREEN P5G41T-M LX2 - Manual (Page 23)

 Chapter 1: Quick Start
1.7.5 SATA hard disk drive
1. Insert the SATA hard disk drive into
the bay.
. Align with the screw holes and
secure the disk drive with screws.
3. Orient and connect the SATA cable
to the hard disk drive. The cable can
only fit in one direction.
4. Connect the SATA power cable to
the connector at the back of the
hard disk drive.
Notes for installing SATA hard disk drive
• Serial ATA (SATA) interface
provides higher data transmission
speed, and better voltage tolerance.
The narrow design of the SATA
cable also solves cabling issues
and allows better airflow in the
chassis.
• The SATA power cable connector
is different from the traditional
4‑pin power connector. ASUS
motherboard bundles power adapter
cables for you in case your power
supply unit does not include this
new connector.