chiliGREEN P5G41T-M LX2 - Manual (Page 609)

607
ไทย
2. Install th. standoffs to th.
match.d sc..w hol.s on th. m.tal
plat..
3. The I/O shield edge springs may
damag. th. I/O po.ts. B. cautious
wh.n installing th. I/O shi.ld.
4. Position th. I/O sid. of th.
moth..boa.d towa.d th. ..a.
of th. chassis and plac. th.
moth..boa.d into th. chassis.
5. Insert and loosely tighten each
screw in a diagonal sequence first.
Aft.. all th. sc..ws hav. b..n
ins..t.d, d.iv. th. sc..ws until
they are finger-tight.
• You may remove the metal slot covers for the expansion cards at the back
of the chassis before installing the motherboard. For some chassis models,
it might be difficult to remove the expansion slot cover after the installation.
• DO NOT over-tighten the screws. Doing so may damage the motherboard.
1.4 Installing the motherboard
1. I/O po.ts diff.. with moth..boa.ds.
Us. and install th. ..a. I/O shi.ld
that com.s with th. moth..boa.d
package only.
Som. sha.p .dg.s and points
might cause physical injury. We
recommend you put on cut or
punctu.. ..sistant glov.s b.fo..
moth..boa.d and I/O shi.ld
installation.