Brother T74 - Manual (Page 27)

B
ASIC USE
Sending a Fax
21
2
Sending a Fax
Scanning Adjustment
Contrast
If your document is very light or very dark, you might want to set the contrast accordingly. Use
LIGHT to send a light document. Use DARK to send a dark document.
1
Insert the document, face down, in the feeder.
2
Press Menu/Set , 3 , 3 .
3
Use or to select AUTO, LIGHT, or DARK.
4
When the screen displays your selection, press
Menu/Set . The screen displays:
5
Press 2 if you have finished choosing settings, and go
to Step 6—OR––Press 1 if you want to select
additional settings. The display returns to Setup Send
menu.
6
Enter a fax number and press Start to send a fax.
Resolution
When you have a document in the feeder, you can use the Resolution key. Press Resolution
continuously until you see your selection on the screen. If you want to set a different resolution for each
page, see “Multiple Resolution Transmission” on page 41.
Sending Operation
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before sending the
fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone—OR—press Speaker Phone .
3
Enter the fax number you want to call. See “Dialling a Number” on page 22.
4
When you hear the fax tone, press Start . If you’re using the handset, hang up.
Standard: suitable for most typed documents.
Fine: good for small print; transmits a little slower than standard resolution.
Super Fine: good for small print or artwork; transmits slower than fine resolution.
Photo: use when document has varying shades of grey; slow transmission time.
NEXT
ACCEPTED
1.YES 2.NO