Advantages of caller id, For business, At home – Brother T74 User Manual
Page 50: Set the caller id to on, How does the caller id work, The caller id is stored in your machine’s memory
44
Chapter 8
Advantages of Caller ID
For Business
All businesses profit from a quicker response to customer calls.
At Home
Residential customers can protect themselves from unwanted calls by seeing the callers name or
number before they answer.
Set the Caller ID to ON
If you have BT Caller ID on your line, then this function should be set to ON to display the caller’s
phone number on the fax LCD as the telephone rings.
1
Press
Menu/Set
,
0
,
1
. The screen displays;
2
Press
or
to choose ON, and press
Menu/Set
.
3
Press
Stop
to exit.
How Does the Caller ID Work?
The Caller ID Appears on the Display When Your Telephone Rings
As your telephone rings, the display shows you the caller’s phone number. If the callers name is
stored in your machine as a Speed Dial, or One Touch dial, the callers name will be displayed. Once
you pick up the handset, the caller’s ID disappears. You will see up to the first 16 characters of the
number on the display.
The Caller ID is Stored in Your Machine’s Memory
The machine can store a maximum of the last 30 incoming caller IDs in the memory, along with the
time and date of reception. The 31st call will cause the oldest ID to be erased.
The Caller ID information stored in the memory can be used for the following.
■ Selecting a Caller ID from the Memory for Call Reply.
You can scroll through the Caller IDs on the display and select one for your machine to dial.
(See below)
■
To get the Caller ID Service: apply for the Caller ID service at your local
telephone company, if available.
■
To PABX Users :
Calling line identification signals are not generally delivered to your Brother fax
machine if it is connected behind a private branch exchange (PBX) system or
other call routing device.
■
If “# UNAVAILABLE” appears on the display, it means that the call came from
outside your caller ID service area. *
■
If “# WITHHELD” appears on the display, it means the caller intentionally
blocked the transmission of his/her ID. *
■
If no caller ID was transmitted to your fax machine, “PICK UP PHONE” will
remain on the display.
* Depends on network Function.
DISPLAY ID
SELECT { } & SET