COATS ProGuard Leverless Plus Tire Changer - Manual (Page 29)

Operation Manual - COATS PRO GUARD PLUS - 29
17
- Press the button ref. 11 to lower the upper bead loosening roller until the upper bead reaches 3 cm level under the
rim edge.
- Make sure that the upper bead of the tire rests on the left lip of the head and under the demountig claw on the
right side of the head.
- Press the pedal ref. 2 to rotate the wheel clockwise, contemporarily press the tire
manually from “5 o’clock” position to force the bead at drop-center position.
Keep it pressed while rotating up to “8 o’clock” position to complete
the upper bead mounting.
Make sure that rim and tire always spin together.
- To make the upper bead mounting easier, use the tire pressing unit by setting it at “5
o’clock” position and pressing lever ref. 17 to keep the bead at drop-center level while
rotating up to “8 o’clock” position until the tire complete mounting.