CounterPath Bria iPad Edition 2.4.2 User Guide - Manual (Page 52)

CounterPath Corporation
48
Account Advanced (SIP)
Enable SMS ON to send an SMS to PSTN cell phone numbers by using the SIP SIMPLE protocol. Turn ON if your
VoIP service provider supports this feature. The purchase of “Presence and Messaging” is required to
use this feature.
Split Long Messages This setting controls who will split a long SMS - either the client side or the server side. You can type
long messages on Bria regardless of this setting. The default is off (server side). Turn this on if your
SIP server does not accept/split long SMS.
• when on, Bria splits a long message to multiple SMS (140 characters per one SMS), and sends
them to the SIP server.
• when off, Bria sends a long message to the server and lets the server split it to multiple SMS.
Field Description
Out. Proxy If your VoIP service provider has an outbound proxy and requires that you provide that address to
Bria, enter the domain name or the IP address obtained from your provider.
Auth Name May not be required. But if it is required, it will be provided by your VoIP service provider.
Send DTMF using The method used for DTMF, sent when you press a number key when dealing with an auto
attendant (such as “press 1 for customer service
” ). In-band DTMF can be sent in addition to the
other two methods.
Choose a method specified by your VoIP service provider.
Field Description