CounterPath Bria iPad Edition 2.4.2 User Guide User Manual

Page 64

Advertising
background image

CounterPath Corporation

60

Audio Codecs Selection

Mobile Audio Codecs

Wi-Fi Audio Codecs

These two screens list the audio codecs that can be used during a Wi-Fi call or mobile data call. Codecs are
programs in Bria involved in transmitting audio; each codec has different characteristics and therefore each
works better in some situations than in others.

In general, it is desirable to have several codecs enabled. Make sure that there are common codecs between you
and the remote peer, otherwise your call will fail with a 488 error.

Novice and Non-technical Users

We recommend you use the default setting/priority and let Bria select the best codec to use in a given situation.

Technically Savvy Users

You may choose to enable one, some or all codecs. If only one codec is enabled, all calls will be made with that
codec. If more than one is enabled, Bria negotiates the codec to use (from among the enabled codecs) with the
other person.

You can prioritize codecs by dragging them up or down in the list. Codecs higher in the list are given a higher
priority in the offer, when negotiating codecs with the other party. Therefore, moving a codec higher should
improve its chances of being chosen.

G.722, AMR-WB, SILK-WB (16kHz), SILK-HD (24kHz), and Opus-Full HD (48kHz) are wideband codecs.
All other codecs are narrowband. When a wideband codec is used, data usage will be higher and audio quality
will generally be better. When a narrowband codec is used, data usage may be lower but audio quality may be
affected.

Data usage for the codecs with a fixed bit rate, from high to low usage, is: G.722, G.711, iLBC, GSM, G.729a.
AMR-WB, SILK, and Opus have a variable bit rate; the data usage will fluctuate depending on the network
conditions.

Advertising
This manual is related to the following products: