CounterPath X-Lite 4 for Mac User Guide - Manual (Page 30)

CounterPath Corporation
26
Accounts – General
Table 3: Accounts – General
Field Description
Account name If desired, change the account name to something that is meaningful to you. For example, the
name of the VoIP service provider.
Protocol Read-only. Always specifies SIP.
Use for Leave these fields checked.
User Details
User ID Provided by your VoIP service provider.
Domain
Password
Display name This name is displayed in the X-Lite title bar. Other people will see you as this name.
Authorization name May not be required. If it is required, it will be provided by your VoIP service provider.
Domain Proxy
Register with domain and receive
calls Check this box if you want to register with your VoIP service provider, so that you can receive
incoming calls.
Typically, this field is checked.
This field may be left unchecked when, for example, your level of service does not include the
ability to receive incoming calls. In that case, turning this field on may cause registration to
fail (when you close the Account Properties window), meaning that your X-Lite cannot
register with your VoIP service provider.
Send outbound via Choose the setting specified by your VoIP service provider:
• Domain: If your VoIP service provider requires that traffic be directed to proxies that are
discovered via the domain.
• Proxy Address: If your VoIP service provider has an outbound proxy address and requires
that you provide the address to X-Lite. For the address enter a domain name (for example,
domain.com) or an IP address (for example, 123.456.789.012).
If you are using X-Lite in a test lab, it is possible that neither of these settings is suitable; see
page 33 for a third way to direct traffic.
Dial Plan See page 47.
Fields with an asterisk are
required