Dascom 7010 Programmers Manual DMX - Manual (Page 116)

1-114
Bar code type: W1D (Data manual setting)
File format:
<Model selection method>
<Bound mode identifier ("D")><Code number>
<Number of divisions><Parity data>,
<Error correction level><Mask number>
<Data input mode("M")>,
<Character mode1><Data character string1>,
<Character mode 2><Data character string2>,
< : >< : >,
<Character mode n><Data character string n>,
[End code]
Bar code type：W1d (Automatic data setting)
File format:
<Bound mode identifier ("D")><Code number>
<Number of divisions><Parity data>,
<Data character string> [End code]
The following data should be placed before standard mode file specification.
Bound mode identifier <D>
Code number <01 to 16>
Value indicating the position of code among number of
divisions..
Number of divisions <01 to 16>
Value of number of divisions
Parity data<1 byte>
Value (bytes) of all print data (Print data before division) with
EX-OR removed.
Error correction level, Mask number, Data input mode, Character mode and Data
character string are the same as those of the normal mode
.