Dascom 7010 Programmers Manual DMX - Manual (Page 40)

1-38
Setting reflective paper sensor selection
Code [02] r
Function Detects label position automatically by reflective paper sensor.
Reflective paper sensor detects black lines that are printed on the
back of the label and understands the label position. In default,
reflective paper sensor is selected.
Caution When detection is not performed properly, check the sensor position.
Example As shown in the figure below, label position is detected with the black
lines on the back of the label.
Label paper gap
Direction of feed
Black line
Black line
Black line
* Figure above shows the back of the paper