Dascom T5040 User Guide - Manual (Page 56)

Menu User Guide
48
Calling up the menu You can access the menu in the following way:
Ensure the printer is powered off.
Power on the printer whilst holding the
USER1 key.
The printer initialises and the LCD displays
the message:
Menu configurations
(USER1/USER2) Every printer is shipped with factory default settings. Basic settings
such as emulation, character pitch, form length etc., which many appli-
cations make use of, are set. At the end of this chapter you will find a
menu printout (status page) (
Status page (example)
, page 58) which
shows the printer’s default settings.
Your printer allows you to set and use two independent menu configu-
rations (USER1 and USER2). If one of your applications for example
requires an IBM printer while another program demands an EPSON
printer, you can set an IBM emulation configuration with the desired
settings, and set the second configuration as an EPSON emulation.
SETUP
PAPER
STOP
/EJECT
USER1 USER2
SETUP
PAPER
MENU
COMMON
STOP
/EJECT
USER1 USER2