Dascom T5040 User Guide - Manual (Page 89)

User Guide Care and maintenance
81
After finishing the cleaning process the LCD
displays the Message MSR-H Cleaning OK.
You can repeat the cleaning routine by pres-
sing the STOP/EJECT key.
If an error occurs during the cleaning process,
the LCD displays the message MSR-H Cle-
aning Error after the cleaning action has
ended.
Switch the printer off and on again in order to
set the printer in the normal operating mode.
The cleaning sheet can be used several times.
SETUP
PAPER
MSR-H Cleaning
OK
USER1 USER2 STOP
/EJECT
SETUP
PAPER
MSR-H Cleaning
Error
USER1 USER2 STOP
/EJECT
USER1
SETUP
STOP
/EJECT
USER2
PAPER