ElmoMC SimplIQ Servo Drives Composer User Manual - Manual (Page 49)

2.13.2 Opening Communication Directly
You may activate the communication network directly to either define a new application
or to use an existing one.
You may do this in one of three ways:
ƒ
By clicking Open Communication Directly from the Welcome to Composer
Application window displayed when you first access the Composer (
section 2.2 )
ƒ By clicking the
button in the Composer toolbar
ƒ By selecting Communication – Open Communication Directly from the Composer
menu bar
The Application Name and Communication Type dialog box will be displayed:
To define your communication network:
1. In the Application Name textbox, type a name for the application or use the default
name displayed.
2. In the Select Communication Type block, select the communication network to be
opened. To further define the network parameters — or to communicate with more
than one drive — click Properties, which displays the RS-232 Properties dialog box
(
section 2.3.1 ) or CANopen Properties dialog box ( section 2.3.2 ) respectively.
3. Once you have selected your communication parameters, click Finish.
Composer User Manual Using the Wizard
MAN-COMPUM (Ver. 1.9)
2-8