Indicator lights – ETC Desire Series XTI v1.6.0 User Manual
Page 24
19
Desire XTI Series v1.6.0 User Manual
Pass Thru Plug
Removing a fixture from the middle of a data run will eliminate DMX/RDM for the
subsequent fixtures. To allow DMX to continue down the fixture line you will need to replace
this fixture with a Pass Thru Plug. To purchase this Pass Thru Plug, contact an ETC dealer
and request part number 7410K4006. For instructions on building your own Pass Thru
Plug, go to
www.etcconnect.com
and search the wiki articles for “Desire DMX Pass Thru
Plug”.
Indicator Lights
The indicator lights on the back of D40/D60 XTI fixture show the status of power input
(blue), DMX input (green) and fixture errors (red). When the DMX/RDM signal is lost, the
green indicator flashes. For more information, refer to
.
Figure-1.3 Indicator lights on the D40/D60 XTI fixture.