Quick start, Install, Focus – ETC Desire Series XTI v1.6.0 User Manual
Page 43: Configure, A p p e n d i x a, Install focus configure, Appendix a quick start
A
Quick Start
38
Appendix A
Quick Start
This section will help you to quickly use the Desire XTI Series fixture. For complete, detailed
information and step-by-step instructions, see
Install
Step 1:
Hang or mount the fixture using the provided hardware and approved hardware
accessories.
Step 2:
Attach an approved safety cable.
Step 3:
Install a secondary lens, if needed, with the smooth side out.
Step 4:
Attach additional accessories (half shield, louver, etc.), if needed, onto the
fixture.
Focus
Step 1:
Using an RDM configuration tool or DMX/RDM control device, turn the fixture on
to full intensity.
Step 2:
Adjust the fixture's position as needed.
Step 3:
When focusing is complete, return the fixture to normal operation.
Configure
Set DMX Address
Step 1:
Using an RDM configuration tool or RDM lighting control device, set the address
of the fixture.