ETC Source Four CE HID PARNel - Manual (Page 3)

English
Source Four HID PARNel CE 3
Source Four HID PARNel CE guidelines
Please note the following precautions prior to use:
The Source Four HID PARnel CE is intended for professional use only. Read the entire User Guide before
using equipment.
Please note the following safety precautions:
• The Source Four HID PARNel CE is NOT dimmable. Dimming or regulated voltage will damage the ballast and
void the warranty.
• Do not mount the Source Four HID PARNel CE on or near a flammable surface.
• Use the Source Four HID PARNel CE in dry locations only, where humidity does not exceed 90 percent.
• The fixture is for indoor use only and is not intended for outdoor use.
• For temporary installations, mount and support the Source Four HID PARNel CE only by the primary suspension
yoke holes. Suspend the fixture from a hook clamp or a stand mount, using a securely tightened steel bolt (up to Ø
12 mm), flat washer and locking washer.
• In addition to primary suspension, attach a safety cable (Model 400SC) or chain to the secondary suspension
point on the Source Four HID PARNel CE.
• If the external cable is damaged, it shall be replaced by ETC or our service agents.
• Always hang the Source Four HID PARNel CE with the colour frame held securely behind the PAR retaining chan-
nel.
• Always replace the lamp if it becomes damaged or thermally deformed.
• Lighted objects at this distance or greater will not exceed 90ºC temperature from projected light.
• Disconnect the unit from power before all cleaning and maintenance.
• The Source Four HID PARNel CE is suitable for indoor use with a maximum ambient temperature: T
a
=45°C
• Maximum exterior surface temperature: T
max
=200ºC
• A multilingual label sheet is included with this manual. Affix the label of the appropriate language over the existing
warning label on the extension yoke. Do not cover ETC trademark or CE mark.
• The Source Four HID PARNel CE contains a CE safety screen that covers the lens in the event of accidental dis-
charge. Do not remove the safety screen.
• Keep the luminaire at least 0.7 meters away from anything it is shining on.
0.7m