Feiss VS3900_ - Manual

1
Installation Instructions for
Kenton 1, 2, 3, and 4 Light Vanity Strip
1.0
VS3900_
Wall
VS3900_-_
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Note: For single light fixture, mounting plate studs must face horizontally.
Install the shade and spacer by placing them over the socket and securing them with the collar nut.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
If necessary, repeat steps 2 and 3 for remaining shades.
1
2
1A
LAMP
3
3
SHADE
COLLAR NUT
SOCKET 1
2
4
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SPACER
SHADE TOOL
MOUNTING
PLATE STUD