Feiss VS46003 - Manual

1
Installation Instructions for
Amalia 2 and 3 Light Vanity Strip
1.0
V 46002-VS46003 S
Wall
V 46002, V 46003-_ S S
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory” N R T L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Secure the mounting plate to the electrical box with two mounting plate screws.
Align the anchors with the mounting plate holes and install them by pushing them into the wall.
Screw the anchor screws into the anchors.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the electrical box, mount the fixture base onto the mounting plate, and secure it with the fixture screws.
Install the shades and spacers by placing them over the sockets and securing them with the collar nuts.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
1
2
1A
LAMP
3
9
SHADE
COLLAR NUT
SOCKET
1
2
4
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
SPACER
MOUNTING
PLATE SCREW
ELECTRICAL BOX
ANCHOR
MOUNTING
PLATE ANCHOR
SCREW
ALLEN WRENCH
FIXTURE SCREW
ANCHOR
SCREW
TOP VIEW
5
6
7
8
9
1
2
3
3
8
7