Feiss WB1601 - Manual

1
Installation Instructions for
Peyton 1 Light Wall
1.0
WB1601
CAUTION - RISK OF FIRE
This product requires installation by a qualified electrician.
Before installing be sure to read all instructions and
TURN THE POWER TO THE ELECTRICAL BOX OFF.
Wall
WB1601_
G P I : ENERAL RODUCT NFORMATION
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Secure the mounting plate to the electrical box with two mounting plate screws.
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the set screws.
Install candle tube by slipping through socket.
Install candle follower onto the top of the candle tube.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
1
2
3
4
5
6
LAMP
CANDLE TUBE
8
1
NEUTRAL WIRE
WHITE WIRE
HOT WIRE
BLACK WIRE
ELECTRICAL BOX
MOUNTING
PLATE
1
1
5
MOUNTING
PLATE SCREW
SET SCREW
7
6
8
FIXTURE BASE
CANDLE FOLLOWER
8
7
1A