Feiss WB1598 - Manual

1
Installation Instructions for
Pickering Lane 2 Light Wall
1.0
WB1598
Wall
WB1598_
G P I : ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally
ecognized esting aboratory”
N R T L
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Secure the mounting plate to the electrical box with the two provided mounting plate screws .
Connect the fixture ground wire to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Mount the fixture base onto the mounting plate and secure it with the set screws.
Install candle tube by slipping through socket.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Place shade in shade holder.
1
2
3
4
5
6
1A
LAMP
CANDLE TUBE
SHADE
7
1
NEUTRAL WIRE
WHITE WIRE
HOT WIRE
BLACK WIRE
ELECTRICAL BOX
MOUNTING
PLATE
1
1
5
MOUNTING
PLATE SCREW
SET SCREW
7
8
6
8
8
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.