5 installation, 1 mechanical assembly, 5installation – Festo DHTG User Manual
Page 24
DHTG
24
Festo – DHTG – 1404d English
•
Remove all transport packing such as foils, caps, cartons (except for any sealing elements in the
pneumatic connections and holes for the proximity switches). The packing is intended for recycling
(except for: oiled paper = other waste).
•
Use the product in its original condition without any unauthorised modifications.
•
Take the tolerance of the tightening torques into account. Unless otherwise specified, the tolerance
is ±20 %.
5
Installation
5.1
Mechanical assembly
•
Make sure there is sufficient space for the pneumatic connections, for conversion or for replacing
the shock absorber.
•
Fasten the DHTG with four screws and ZBH centring sleeves.
Tightening torques
Tab. 1, Tab. 2.
Direct mounting from above
Size
65
90
140
220
Screw
M4
M6
M6
M8
Recess for
centring sleeve
[mm]
7
12
12
15
Tightening torque
[Nm]
2.9
9.9
9.9
24
Tab. 1
Direct mounting from below
Size
65
90
140
220
Screw
M5
M8
M8
M10
Recess for
centring sleeve
[mm]
7
12
12
15
Tightening torque
[Nm]
5.9
24
24
47
Tab. 2
Fig. 3
Fig. 4