Garland HO IN 1800 INDUCTION TEMPERATURE CONTROLLED BUILT-IN HOLD-LINE - Manual (Page 11)

Installation RTCSmp Built-In Temperature Controlled Hold-Line
Part # 4532286 Rev 3 (6/10/14) 11
4.5 Dimensions and Installation
4.5.1 Heat Retaining Plate Installation
The Heat Retaining Plate is to be flush-mounted. A support frame or support structure has to be custom designed
and built for housing the retaining plate(s).
4.5.1.1 Dimensions: RTCSmp HOIN450/900/1350/1800 Heat Retaining Plate
(measurements in mm and [inch])
4.5.1.2 Cut-Out Dimensions
 Please review carefully the dimensions in section 4.5.1.1.
 Refer to Detail A in section 4.5.1.1:
A. Cut-out dimension on the counter surface: 330 x 330mm [12.99” x 12.99”].
NOTE: Dimensions include widths for silicone joints on all four (4) sides.
Consider adjusting cutout dimensions based on mounting methods, see 4.5.1.3.
B. Recommended recess depth: minimum 8.00 to 8.64mm [0.315”to 0.34”].
C. Body Clearance (width x depth x height): 300 x 300 x 100mm / 11.81” x 11.81” x 3.94”.
A
A
B
C
A
FRONT