General Machine Products 89004 Portable Powered Duct Rod Pusher - Manual (Page 17)

Page 17 of 40
General Machine Products Co., Inc.
IN THE EVENT OF AN EMERGENCY
1. Push the emergency stop push button. 2. Turn the hydraulic valve to the ‘off’ position.
3. Turn the speed control knob to “Min”
position (fully counter clockwise) 4. Press the on/off button (to turn off the
electric’s off, if required).
24. IF THE PUSHING MACHINE STOPS SUDDENLY
If the rod pushing machine stops suddenly during the pushing operation it is likely that
the pressure switch has tripped, the probable reasons for this are: -
A) The rod has become jammed, has hit an obstruction in the duct or the rod pushing
operation has reached its maximum capability.
B) The power pack has developed a problem or has run out of fuel.