General Machine Products 70046 Strand Tensionmeter - Manual (Page 5)

5
•
Do not measure tensions of 1/2" diameter
strand with the cable in place; these tension
values usually exceed 10,000 pounds.
•
Do not drop or jar the Tensionmeter.
•
Raise and lower the instrument with a hand
line.
•
Keep the device away from dirt, grease, sand
or water.
•
Keep foreign material from damaging the dial
or plunger.
•
Maintain the unit in the carrying case when-
ever possible.
•
Make certain that the correct calibration chart
is always kept in the carrying case.
•
Use the Tensionmeter only on strand type and
sizes shown on the calibration chart.
•
Do not use this device on strand tensioning
applications exceeding 10,000 pounds.
p
Precautions
The Tensionmeter is primarily made from nickel-
plated steel and is furnished in a hard shell plastic
carrying case; the interior is cushioned with foam
for unit protection.
Each Tensionmeter has a registered serial number
stamped on the unit.