GeoDesy GD-Geo20-TP - Manual (Page 41)

41
for wireless network devices. The communication between managed devices and the WNMS server is
always initiated by an WNMS client service running on every device.
Enable WNMS agent
– select to enable WNMS agent.
Server/Collector URL
– specify the URL of the WMS server to which that heartbeat notifications will
be sent to.
7.3.2 System alerts
The device is able to send external alerts when there are system errors. The alerts can be sent via
SNMP Traps or/and SMTP notifications.
Enable alerts
– select to enable alert notifications on the system.
System check interval, s
– specify interval in seconds at which the device will send notifications of
unexpected system behavior.
System alerts:
Wireless link status change
– system will send notification on Wireless link status change.
Ethernet link status change
– system will send notification on Ethernet link status change.
RSSI level lower than
– system will send notification when RSSI reach value lower than specified.
Default: 25
Noise level greater than
– system will send notification when signal noise will reach value greater
than specified. Default: -60 dBm.
RX drop greater than
– system will send notification when percent of RX dropped packets become
higher than specified value. Default: 250 packets per seconds.
TX retry greater than
– system will send notification when percent of TX retries becomes higher than
specified value. Default: 250 packets per seconds.
Device reboot
– system will send notification about unexpected or administrator initiated device
reboot.