Bose LIFESTYLE VS-2 User Manual
Page 16
16
Dansk
Italiano
Svenska
Deutsch
Nederlands
English
Français
Español
B
AS
IC
S
YSTEM
C
ONN
E
CT
IO
NS
B
ASIC
S
YSTEM
C
ONNECTIONS
4
Connect the VS-2 video enhancer to the media center
To complete this connection, you need the power supply and the VS-2 cable.
A. Insert the Serial Data plug into the Serial Data connector.
B. Insert the DC Power plug into the DC Power connector.
C. Insert the Composite plug into the Composite Video OUT connector.
D. Insert the S-Video plug into the S-Video OUT connector.
E.
Insert multi-pin plug into the Media Center connector.
F.
Insert the DC Power plug into the DC POWER Out connector.
G. Insert the DC power cord from the power supply into the DC POWER In connector on
the VS-2.
Note: Straighten the DC power cord from the power supply to the VS-2 and from the VS-2 to
the media center as much as possible. This cord is used as the antenna for your LIFESTYLE
®
system remote control.
Figure 8
VS-2 connections to the
media center
VS-2
cable
VS-2 end panel
Power supply
Media center rear panel
VS-2 video
expander
A
G
DC power cord
B
C
D
E
F