Ptional, Onnections, Dditions – Bose LIFESTYLE VS-2 User Manual

Page 27: Using digital audio connections, Making coaxial digital audio connections, Making optical digital audio connections, Activating an optical connection, Optional connections and additions

Advertising
background image

27

O

PTION

A

L

C

O

NNECT

IO
NS

AND

A

DD

IT
IO
NS

Italiano

Svenska

Deutsch

Nederlands

English

Français

Español

O

PTIONAL

C

ONNECTIONS

AND

A

DDITIONS

Using digital audio connections

The media center provides two types of digital audio input
connections (Figure 18):

• Coaxial digital (D) audio connection – requires a 75

Ω coaxial

cable with RCA connectors.

• Optical digital audio connection – requires an optical digital

cable (included).

If you need cables, you can find these in consumer electronics retail stores.

Figure 18

Digital audio connections

Note: When using a digital audio connection, be sure to maintain your analog connection, too.
In this way, you ensure continuous sound when a digital signal is absent or interrupted. It also
supports the use of a Bose

®

link connection for expansion into other rooms.

Making coaxial digital audio connections

Using a 75

Ω coaxial cable with RCA connectors, connect the digital (D) audio output of each

source to its respective digital (D) audio input on the media center.

Note: To make digital recordings from a connected optical component, connect another optical
cable to the Optical OUT jacks on the media center rear panel.

Making optical digital audio connections

Only one audio source output can be connected to the media center using an optical cable.
Connect the optical output of your selected source to the Optical IN connector on the media
center. After turning on the system, you need to activate this connection in the system menu.

Activating an optical connection

1.

Turn on your TV and LIFESTYLE

®

system.

2.

Press the System button on the LIFESTYLE

®

system remote.

3.

Press the right arrow key and highlight the Media Center tab. Press Enter.

4.

Press the down arrow key and highlight Optical Source. Press Enter.

5.

Select the component that is connected to the Optical IN connector. Press Enter.

6.

Press Exit to leave the System menu.

Note: You also may need to activate the optical output in the audio source.

RCA coaxial cable

Optical digital cable

D Audio IN

coaxial digital

audio

Optical IN

optical digital

audio

Media center connector panel

Advertising