INFICON RS-3000 Power Supply Controller - Manual (Page 11)

RS-3000 Power Supply Controller
instruments
key (PRGM) the large display is blanked while the small display shows a value. The LED
indicators that are illuminated now include the RAMP and MIN LEDs. This indicates that
the value shown on the small display is the ramp minutes. With the third press of the
program key (PRGM) the small display is blanked while the large display shows a value.
The LED indicators that are illuminated now include the RAMP and CUR LEDs. This
indicates that the value shown on the large display is the ramp current. In these cases, the
INC and DEC keys are used to set the values as needed. The program (PRGM) key
sequences through the programmable elements with each subsequent press until all
elements have been shown. In the programming mode, the program mode LED is
illuminated and flashing. When the program mode LED turns off the last of the
programmable elements is no longer shown and displays revert to the mode context from
which the program mode was launched.
Front Panel Interface Page 2 - 2 Section 2