INFICON RSH-600 Rotary Sensor - Manual (Page 14)

1 - 6
IPN
1
5
3800
-G
RSH-600 Operating Manual
1.7 Unpacking and Inspection
1 If the RSH-600 rotary sensor has not been removed from its shipping container,
do so now.
2 Carefully examine your RSH-600 sensor for damage that may have occurred
during shipping. This is especially important if you notice obvious rough
handling on the outside of the container. Immediately report any damage to the
carrier and to INFICON.
3 Do not discard the packing materials until you have taken inventory and have
at least performed a functional verification (see
section 1.8 .)
4 Take an inventory of your order by referring to your order invoice and verifying
that the items listed in
section 1.7.1 were received.
1.7.1 Base Configuration
RSH-600 Rotary Sensor Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15320X-XX
Consult
Figure 1-3 below for possible configurations.
Figure 1-3 RSH-600 Configurations
Crystals (2 boxes, 10 total). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103200-2
Technical Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153800 on 074-5000-G1 CD