INFICON Front Load Single Sensor - Manual (Page 33)

1 - 23
PN
07
4-
15
6N
Front Load Single and Dual Sensors Operating Manual
1.8 Feedthroughs
NOTE: Sensor/feedthrough combination temperature specifications are limited by
lowest temperature specification of the component.
1.8.1 Specifications for 2.54 cm (1 in.) Bolt
Mounting. . . . . . . . . . . . . . . . . . . . . . 25.781 mm (1.015 in.) ±0.254 mm (0.010 in.)
diameter aperture
Ultra-Torr O-ring compression fitting terminations
Maximum operational
environment temperature
with no water . . . . . . . . . . . . . . . . . . 165°C
Maximum operational
environment temperature
with minimum water flow . . . . . . . . . 300°C
Materials. . . . . . . . . . . . . . . . . . . . . . 304 stainless steel, Teflon, glass, brass,
beryllium copper, VITON®
Welded terminations
Maximum operational
environment temperature
with no water . . . . . . . . . . . . . . . . . . 165°C
Maximum operational
environment temperature
with minimum water flow . . . . . . . . . 450°C
Materials. . . . . . . . . . . . . . . . . . . . . . 304 stainless steel, Teflon, glass, brass,
beryllium copper