INFICON Front Load Single Sensor - Manual (Page 62)

3 - 4
PN
07
4-
15
6N
Front Load Single and Dual Sensors Operating Manual
3.4 Pneumatic Connections
Figure 3-1 Pneumatic solenoid valve tube connections
3.5 Electrical Connections
To complete installation of the assembly, make electrical connections
where indicated in
Figure 3-3 on page 3-6 to either 24 V(ac) or V(dc).
Current required is approximately 70 mA.
CAUTION
The maximum applied voltage must not exceed
26 V (ac) or 26 V (dc).
3.6 Solenoid Valve Drawings
The following Solenoid Valve Outline Drawings provide dimensions and other
relevant data necessary for planning equipment configurations.
Figure 3-2 on page 3-5 . . . . . . . . . . . Solenoid Valve (PN 750-420-G1)
Figure 3-3 on page 3-6 . . . . . . . . . . . CF40 (2-3/4 in. ConFlat) Dual Coaxial
Feedthrough and Solenoid Valve Outline
To Air
Fitting Of
Feedthrough
Exhaust
(Normally Open)
A Output
Port
P Supply
(Normally Closed)
Air Supply
Tube Fitting
(Provided With Valve)