Belkin N+ PM00781EA F5D8635-4 - Manual (Page 36)

34
N+ Wireless Modem Router
sections table of contents 1 2 3 4 6 7 8 9 10 5
alTeRNaTe seTUP MeTHod
setting your Connection Type to dynamic/fixed IP (1483 bridged)
This connection method bridges your network and ISP’s network
together . The Router can obtain IP address automatically from yourISP’s
DHCP server or accept fixed IP address assigned by your ISP .
2 . encapsulation – Select LLC or VC MUX your ISP uses .
Click “Apply Changes” to save and activate your settings . To go back to
the original settings before saving, click “Clear Changes” . Or click any
of the Quick-Navigation links for other options . Your new settings will
not be saved unless your click “Apply Changes” .
for dynamic IP connection:
1 . VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here . These identifiers are assigned by
your ISP .