Belkin N+ PM00781EA F5D8635-4 - Manual (Page 70)

68
N+ Wireless Modem Router
sections table of contents 1 2 3 4 5 7 8 9 10 6
UsINg THe Web-based adVaNCed UseR INTeRfaCe
enabling/disabling auto firmware Update
This innovation provides the Router with the built-in capability to
automatically check for a new version of firmware and alert you that
the new firmware is available . When you log into the Router’s advanced
interface, the Router will perform a check to see if new firmware is
available . If so, you will be notified . You can choose to download the
new version or ignore it .
eCo Mode
Your Router has the ability to automatically turn off the wireless radio to
save power . You may also dim the LED icons if they are too bright .
Click the “Dim icon” check box and then “Apply Changes” to lower the
LED’s brightness .
Click the “Disable radio” check box and set the time range during which
to automatically disable the wireless radio . This range will apply every
day except for those days where the corresponding check box is clicked .
Note that you must go back to the firmware to manually turn on the radio
if desired during these time periods .