Belkin N+ PM00781EA F5D8635-4 - Manual (Page 84)

82
N+ Wireless Modem Router
sections table of contents 1 2 3 4 5 6 7 8 10 9
TRoUblesHooTINg
6 . Ensure that the check box “The key is provided for me automatically”
at the bottom is unchecked . If you are using this computer to connect
to a corporate network, please consult your network administrator if
this box needs to be checked .
7 . Type your WEP key in the “Network key” box .
Important: A WEP key is a mixture of numbers and letters from A-F and
0-9 . For 128-bit WEP, you need to enter 26 keys . This network key needs
to match the key you assign to your Router .
For example:
C3 03 0f af 4b b2 C3 d4 4b C3 d4 e7 e4 = 128-bit key
8 . Click “OK”, and then “Apply” to save the settings .
If you are not using a Belkin wireless client card, please consult the
manufacturer’s user manual for that wireless client card .
do belkin products support WPa?
Note: To use WPA security, all your clients must be upgraded to drivers
and software that support it . At the time of this FAQ publication, a
security patch download is available, for free, from Microsoft . This patch
works only with the Windows XP operating system .
Download the patch here: http://www .microsoft .com/downloads
You also need to download the latest driver for your Belkin 802 .11g
Wireless Desktop or Notebook Network Card from the Belkin support
site . Other operating systems are not supported at this time . Microsoft’s
patch only supports devices with WPA-enabled drivers such as Belkin
802 .11g products .
Download the latest driver at http://web .belkin .com/support
I am having difficulty setting up Wireless Protected access
(WPa) security on my belkin Router for a home network .
1 . From the “Security Mode” drop-down menu, select “WPA-PSK
(no server)” .
2 . For “Encryption Technique”, select “TKIP” or “AES” . This setting
will have to be identical on the clients that you set up .
3 . Enter your pre-shared key . This can be from eight to 63
characters and can be letters, numbers, symbols, or spaces .
This same key must be used on all of the clients that you set up .
For example, your PSK might be something like: “Smith family
network key” .
4 . Click “Apply Changes” to finish . You must now set all clients to
match these settings .